I wanted my odyssey gyro back on my s3 so that's what i did:

1) bought a pair of flybikes removable gyro tabs



2) made a sign on the frame with a marker



i controlled the distances first and signing the center of the tubes was ok for me

this way:


3) drilled holes with a 2.5mm drill (with the same distance of the holes on gyro tabs obviously)



4) tapped the holes with a 3Mx0.5 thread



5) screwed in the tabs



6) and voilą!




sorry for my horrible english and the low pictures quality but i'm italian and the only thing i had with me was a crap camera phone. hope that helps anyways!

Page 1/1
This article has been read 10385 times

Comments

Publish your own Article