by etoy | 03 Apr 2007 6:49 pm
I wanted my odyssey gyro back on my s3 so that's what i did:
1) bought a pair of flybikes removable gyro tabs
2) made a sign on the frame with a marker
i controlled the distances first and signing the center of the tubes was ok for me
this way:
3) drilled holes with a 2.5mm drill (with the same distance of the holes on gyro tabs obviously)
4) tapped the holes with a 3Mx0.5 thread
5) screwed in the tabs
6) and voilą!
sorry for my horrible english and the low pictures quality but i'm italian and the only thing i had with me was a crap camera phone. hope that helps anyways!
Seite 1/1
Dieser Artikel wurde bereits 4284 mal gelesen
Kommentare
Eigenen Artikel veröffentlichen
