Ok.. so a fullguard sprocket..made out of 6061 alumium. It comes in many sizes from 25t-39t and all between to meet your size needs. It will hold up to most sprocket stalls. I used to try abubacas alot on subboxes and always hit my sprocket on the way down when my brakes slipped out but this sprocket seemed to keep it together. It costed me $45 and i've been running it for about 6 months. The only problem with it is it doesn't fit cranks like primo hollowbites too easily, so you might have to cut it down a little with a grinder. its not too hard and once you get it going right it works good. Sprocket grinds and stalls are alot easier on your chain with this sprocket. It will thank you and so will your knees.

Pros:
Many Sizes
2 colors (pewter and black)
4 sprocket hole placements
thick

Cons:
Won't fit some cranks without customization.

I give this sprocket a 8 out of 10.

Seite 1/1
Dieser Artikel wurde bereits 845 mal gelesen

Kommentare

Eigenen Artikel veröffentlichen