These are tricky. It took me a really long time to get them clean, but now that I can do them they're one of my favorite tricks. I've got some videos of them now but I don't have editing software so I couldn't put them in slow motion or crop them or anything. Sorry about cutting my head off in the screen shots.

1. You want to be going at a medium speed not too fast or you might die and not too slow because it makes the spin harder.

2. Here is a major key to doing spins on flat, you need to start carving and when you carve lean into your spin. It fees weird but it works. You want to carve and lean and turn with your body until your body has almost done a 90 without your bike leaving the ground.


... mehr lesen

Wallrides, probably one of the funnest tricks out there. I can do wallrides all day just cause their so fun.


Ok, thats not a picture of me, i got it off google.

How To:
A. The easiest way to wallride if ur just starting them, is off a bank, like the picture above.^
B. Some people tend to ride along side the wall, then hop and do a tabel-top, you can do it that way, but its harder and you wont get as far.
C: To get on the wall,u want to go ... mehr lesen

Step 1: Take a 12x24" handtowel:

Step 2: Fold it a third lengthways: ... mehr lesen

Required:

2x Plastic Bar ends
2x Undeformed beer bottle caps
2x Headset spacers
Epoxy may be needed.

Tools:

A spark plug socket
A hammer
Screw driver
Hand saw
A pin or a drill

1. First take your bottle cap and enlarge it so you can fit it in the headset spacer with your spark plug socket. ... mehr lesen

Moin,
Da ich zuerst selbst nich wusste wie ich das hinbekomm mach ich jetzt für die (noch)
unwissenden unter euch ein kleines, aber denk ich mal gut zu verstehendes tut.

Ich erkläre:
- Kurbeachse ausbauen
- Einfetten
- Kettenblatt wechseln
- Zusammenbauen

Jo...
los gehts

















Noch zum zusammenbau:
Die schrauben an der Kurbel müssen in einer bestimmten reihenfolge befestigt werden.
Nachdem ihr die Kurbel wieder aufgesteckt habt, zieht ihr die Schraube, die in die Achse
(also von der seite) reingeht fest an (Punkt 4) . Damit wird das "Spiel" das dass die Achse bis jetzt noch hat entfernt.
Nun nur noch die Schraube oben auf der Kurbel (Punkt 3) fest anziehen...fertig =)


Bewertung wär toll, kommentare, fragen usw hier rein

MfG Faint

Alright, I thought that some of some of you might want to know how to strip steel parts (im using my cranks as an example) and sometimes get that sweet those sweet weld marks in the process. Before i start i just want to let you know that not all steel parts will give the the distinctive weld marks, only some parts will give the welds marks. I am using my madera protocol arms as an example.


Alright before you start stripping your parts you want to use the right materials.

I used;

-fast reducer (similiar to acetone and paint thinners but this is what i had readely at the time)

you can buy a big can like this at advanced auto parts for like 15 bucks but u dont need such a big container
... mehr lesen

Hi, in this how-to I will show you how to make ghetto hubguards. First of all you will need a plastic roll thing,
like this:


... mehr lesen